Polygroup TG70M2Q95C00 Assembly Instructions

NEED HELP?
DO NOT RETURN TO STORE. PLEASE VISIT US AT:
www.polygroupstore.com
TREE ASSEMBLY INSTRUCTIONS
Congratulations on purchasing your new tree from Polygroup®! Carefully follow the instructions below on how to quickly
and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section and remove protective cap before inserting
into the assembled stand. Make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all wires are free of
branch hinges.
7. Connect the light strings as per the color labels indicated in Fig. B and insert green label plug into the wall outlet. Your
entire tree should now be lit. If some bulbs do not light or flickers, search for any loose plugs and/or broken, loose or
missing bulbs. Connecting the plugs or replace bulbs promptly in order to maintain the performance and life expectancy
of your pre-lit tree.
MODEL #: TG70M2Q95C00
1-888-919-0070
OR
Click
Tree top
Section 2
Section 1
Pull apart the legs of the stand so that they
are snapped into an x-shape, place the tree
stand on a level surface.
To close the stand, press the metal button
and fold the legs together.
Assemble
Red Labels
Together
Assemble
Yellow Labels
Plug Into Wall
1
*Electrical Rating For The Tree
(For Indoor Use Only)
1.02 A 120 V 60 Hz
Together
Insert
Green Label
Outlet