Download Print this page
Ingersoll-Rand AC Series Maintenance Information
Ingersoll-Rand AC Series Maintenance Information

Ingersoll-Rand AC Series Maintenance Information

Air die grinders and grinders
Hide thumbs Also See for AC Series:

Advertisement

Quick Links

16575052
Edition 1
July 2006
Air Die Grinders and Grinders
Series AC and AG
Maintenance Information
Save These Instructions

Advertisement

loading
Need help?

Need help?

Do you have a question about the AC Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Ingersoll-Rand AC Series

  • Page 1 16575052 Edition 1 July 2006 Air Die Grinders and Grinders Series AC and AG Maintenance Information Save These Instructions...
  • Page 2 WARNING Always wear eye protection when operating or performing maintenance on this tool. Always turn off the air supply and disconnect the air supply hose before installing, removing or adjusting any accessory on this tool, or before performing any maintenance on this tool. Lubrication Whenever one of these Grinders is disassembled for 1.
  • Page 3 Assembly General Instructions Tool Specific Instructions: 1. Assembly sequence is the reverse of disassembly. 1. Always press on the inner ring of a ball-type bearing 2. First install the Throttle Lever Assembly, then the Valve when installing the bearing on a shaft. parts.
  • Page 4: Troubleshooting Guide

    Troubleshooting Guide Trouble Probable Cause Solution Low power or low free Insufficient air pressure. Check air line pressure at the Inlet of the Tool. It speed must be 90 psig (6.2 bar/620 kPa). Clogged muffler elements. Disassemble the Tool and agitate bare Motor Housing and Flange in a clean, suitable cleaning solution.
  • Page 5: Related Documentation

    Related Documentation For additional information refer to: Product Safety Information Manual Form 04580288 and 04584959. Product Information Manual Form 80152853 and 80152846. Product Parts List Manual Form 16574006. Manuals can be downloaded from www.irtools.com. 16575052_ed1 EN-4...
  • Page 6 Notes EN-5 16575052_ed1...
  • Page 7 Notes 16575052_ed1 EN-6...
  • Page 8 www.irtools.com Ingersoll Rand © 2006 Company...

This manual is also suitable for:

Ag series