Make Sure The House Code Settings Match - Bose LIFESTYLE RC-18S Owner's Manual

Code Switch Setting
Figure 3
Nine switches
inside the battery
compartment
14

Make sure the house code settings match

For all of your secondary remote controls to work, the
house code in each must match the one in your primary
remote.
The first four switches define the house code and estab-
lish which media center the remote can control.
House code switches
1 2 3 4 5 6 7 8 9
At the factory, all RC-18S remotes are set with the same
house code as your LIFESTYLE
not need to change these first four switches.
However, in the case of a house code conflict with
another nearby LIFESTYLE
house code in the primary remote to resolve the conflict.
If you ever use this option, the changed house code must
be applied to any expansion remote
controls used with this system, too.
At the factory, each RC-18S remote has its remaining
switches set:
• To receive audio stream 2 (switch 5)
• To be used in Room B (switches 6-9)
To check the settings in your new remote, remove the
battery cover to see the small switches just above the
batteries.
1 2 3 4 5 6 7 8 9
® system. Usually, you do
®
system, you can change the