Page 1
Operator’s manual for Attachment manual for Attachment manual for Attachment manual for Attachment Product number: 300-700-series loaders: A34055 200-series loaders: A34076 Please read this manual carefully before using the equipment, and follow all instructions. Keep this manual for later reference.
Page 2
Push Broom 2012 1 CONTENTS Foreword............................. 3 Designed purpose of use........................3 Safety instructions for using the attachment..................3 Technical specifications........................4 Assembly of the broom ........................5 Instructions for use ..........................6 Maintenance and servicing ........................6 Warranty terms............................ 7 This manual uses the following warning symbols to indicate factors that must be taken into account to reduce the risk of personal injury or property damage: CAUTION:...
Page 3
3(8) 1. Foreword Avant Tecno Oy would like to thank you for your purchase of this AVANT attachment. It has been designed and manufactured on the basis of years of product development and experience. Read the instructions carefully before starting to use the equipment or performing maintenance.
Page 4
Brush type: 150 mm Nylon bristles Brush spare part number: A34085 Suitable AVANT loader 216, 218, 220 300-700 Llisted below are the labels and markings, which must be visible on the equipment. Replace the warning labels, if they have become unclear or detached completely. New labels are available via your retailer or contact information provided on the cover.
Page 5
5(8) 5. Assembly of the broom Attaching the attachment to the loader is quick and easy, but it must be done carefully. If the attachment is not locked to the loader, it may detach from the loader and cause hazardous situations. In the worst case, the attachment may slide onto the driver along a raised boom.
Page 6
6(8) Do not use the automatic locking of the locking pins at a height of over one metre. If the locking pins do not return to the normal position when the front plate is tilted, do not raise the attachment any more. Lower the attachment on the ground and secure the locking manually.
Page 7
7(8) 8. Warranty terms Avant Tecno Oy grants a warranty of one year (12 months) from the date of purchase for the attachment it manufactures. The warranty covers repair costs as follows: • Work costs are covered, if the repair is not performed at the factory.
Need help?
Do you have a question about the A34055 and is the answer not in the manual?
Questions and answers