Setup; 42Am Air Heater; 42Ama Destratifier; Wall-Mounting The 42Am Air Heater - Carrier 42AM Series Installation, Operation And Maintenance Instructions

6 - SETUP

6.1 - 42AM air heater

To ensure correct air diffusion and to comply with the EN 294 standard relating to safety
zones, you are recommended to position AIR HEATER units at a height of:
■ Between 2.5 and 4.5 metres when wall-mounted
■ Between 4.5 and 10 metres when ceiling-mounted.
The rear of the unit must be at a sufficient distance from the wall to facilitate removal of
the fan motor assembly when necessary.

6.2 - 42AMA Destratifier

It is recommended that destratifiers are positioned at a height of 5 to 15 metres.
The rear of the unit must be at least 145 mm away from any walls to facilitate removal of the fan
motor assembly when necessary.

6.3 - Wall-mounting the 42AM air heater

Installation using wall-mounting support kit
Installation mainly for HEATING purposes
Size 42AM-EC30
B
C
D
X mm
Y mm
Dimensions mm
42AM-AC35
42AM-EC35
310
390
Distance to allow between the wall bracket legs for mounting the AIR HEATER
512 558
Installation using low wall-mounting support kit
Installation mainly for COOLING or REVERSIBLE purposes
42AM-AC40 42AM-AC45
42AM-EC40 42AM-EC45
Filter box wall bracket
Wall bracket (Code 7181226)
Drain sleeve in cooling mode, outer diameter 32
610 710
Min: 0.15 m
42AM-AC50 42AM-AC63
42AM-EC50 42AM-EC63
260
340
808 943
42AM-AC64
943
9