Download Print this page

Digi-Code 5010 Programming Instructions page 3

Garage door opener and gate operator remote control transmitter

Advertisement

environment and location or both the transmitter and receiver will impact the range.
Try different mounting locations and positions in the vehicle. If operation is still
undesirable, the problem may be tested by:
Checking the door operator. If the door will not open when the wall button
is pressed, the problem is likely to be the operator. If the door will open
by pressing the wall button, but not when the remote control button is
pressed, the problem is probably in the radios.
Replacing the transmitter battery.
After performing the above operational checks, the controls still do not
function, the should be returned to the dealer for repair or replacement.
For all your garage door opener and parts needs, be sure to visit us 24/7 at
www.stardoorparts.com

Advertisement

loading

This manual is also suitable for:

501150125013506050305062 ... Show all