Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for EKF CompactPCI CB3-TONE
- Page 1 (217) 352-9330 | Click HERE Find the EKF CB3-1-TONE at our website:...
- Page 2 Technical Information ® CompactPCI CB3-TONE • USB 3.0 SuperSpeed Controller Document No. 6860 • Ed. 4 • 31 August 2015 CB3-TONE...
-
Page 3: Table Of Contents
Schematics ..............20 © EKF... -
Page 4: About This Manual
Added photos 15 February 2013 Augmented table ‘Feature Summary’ (reference to PXI) 11 April 2014 Revision 1 PCB - added illustration front panel (indicator LEDs), 31 August 2015 added table 'Similar Products', added photo of sample hybrid system © EKF ekf.com... -
Page 5: Related Documents
This document has been edited as carefully as possible. We apologize for any potential mistake. Information provided herein is designated exclusively to the proficient user (system integrator, engineer). EKF can accept no responsibility for any damage caused by the use of this manual. © EKF... -
Page 6: Standards
PCI 2.2/2.3/3.0 Standards PCI SIG www.pcisig.com PXI® PCI eXtensions for Instrumentation www.pxisa.org/ PXI Hardware Specification Rev. 2.2 Universal Serial Bus Specification 3.0 & 2.0 www.usb.org xHCI eXtensible Host Controller Interface for Universal Serial Bus www.intel.com (xHCI) Rev. 1.0 2010-05-21 © EKF ekf.com... -
Page 7: Feature Summary
Storage temperature: -40°C to +85°C, max. gradient 5°C/min < Humidity 5% ... 95% RH non condensing < Altitude -300m ... +3000m < Shock 15g 0.33ms, 6g 6ms < Vibration 1g 5-2000Hz < MTBF tbd < EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1) < © EKF ekf.com... -
Page 8: Short Description
PCI® to PCI Express® bridge, as interface of external USB 3.0 and USB 2.0 compliant between controller devices. Electronic power switches are provided, CompacPCI® backplane. for up to +5V/1.5A load at any USB connector. © EKF ekf.com... -
Page 9: Theory Of Operation
Up to similar peripheral card based on CompactPCI® ~2Gbps data throughput is available across a Serial (www.ekf.com/s/serial.html). 32-bit CompactPCI® backplane @66MHz. The data rate of a SuperSpeed USB port however is Beyond... -
Page 10: Block Diagram
Technical Information CB3-TONE • CompactPCI® USB 3.0 Controller Block Diagram © EKF ekf.com... -
Page 11: Front Panel
LEDs are lit when a connector is ready for use. Vice versa, a LED is off if the respective USB port is not initialized, intentionally switched off, or a short-circuit situation is detected, presented by the connected device. © EKF -10- ekf.com... -
Page 12: System Integration
Technical Information CB3-TONE • CompactPCI® USB 3.0 Controller System Integration CB3-TONE (2nd from left) in a Sample Hybrid System Similar Products SB3-TONE CompactPCI® Serial USB Controller www.ekf.com/s/sb3/sb3.html EB3-TONE CompactPCI® Express USB Controller www.ekf.com/e/eb3/eb3.html © EKF -11- ekf.com... -
Page 13: Installing And Replacing Components
Store the board only in its original ESD protected packaging. Retain the original packaging (antistatic bag and antistatic box) in case of returning the board to EKF for repair. © EKF -12-... -
Page 14: Installing The Board Assembly
Insert card carefully (be sure not to damage components mounted on the bottom side of the board by scratching neighboured front panels) A card with onboard connectors requires attachment of associated cabling now Lock the ejector lever, fix screws at the front panel (top/bottom) Retain original packaging in case of return © EKF -13- ekf.com... -
Page 15: Removing The Board Assembly
Store board in the original packaging, do not touch any components, hold the board at the front panel only Warning Do not expose the card to fire. Battery cells and other components could explode and cause personal injury. © EKF -14- ekf.com... - Page 16 Cover any unused front panel mounted connector with a shielding cap External communications cable assemblies must be shielded (shield connected only at one end of the cable) Use ferrite beads for cabling wherever appropriate Some connectors may require additional isolating parts © EKF -15- ekf.com...
-
Page 17: Emc Recommendations
USB connector to a safe level. The V power has been derived from the CompactPCI® +5V power rail via the backplane connector J1 and must be supplied by the system power supply. © EKF -16- ekf.com... -
Page 18: Technical Reference - Connectors
A hard metric J1/P1 backplane connector is specified as by the PICMG® CompactPCI 2.0. A mechanical key defines the V Voltage. The CE3-GIG is suitable for either +5V and +3.3V V , which results in a 'no key' J1 connector. J1 conveys prominently the 32-bit PCI parallel bus. © EKF -17- ekf.com... -
Page 19: J1 Backplane Connector
INTS INTA# INTB# INTC# INTD# TDO 1) TDI 1) -12V TRST# +12V 1) TDO - TDI internally connected The CB3-TONE been designed for +5V only operation. Neither the +3.3V power pins nor +12V/-12V are in use. © EKF -18- ekf.com... - Page 20 The CB3-TONE does not support booting from an attached USB device. No TUSB7340 expansion BIOS ROM is provided on-board. EKF offers boot code as part of the CPU UEFI firmware on request. Schematics Complete circuit diagrams for this product are available for customers on request. Signing of a non- disclosure agreement would be needed.
-
Page 21: Drivers
Technical Information CB3-TONE • CompactPCI® USB 3.0 Controller Industrial Computers Made in Germany boards. systems. solutions. EKF Elektronik GmbH Phone +49 (0)2381/6890-0 Philipp-Reis-Str. 4 (Haus 1) Fax +49 (0)2381/6890-90 Lilienthalstr. 2 (Haus 2) Internet www.ekf.com 59065 HAMM E-Mail sales@ekf.com Germany...
Need help?
Do you have a question about the CompactPCI CB3-TONE and is the answer not in the manual?
Questions and answers