Nissan v6 86-89 hard body, pathfinder pickups (5 pages)
Summary of Contents for Doug Thorley Headers THY-470
Page 1
THY-470 NISSAN/ SUZUKI 4.0L FRONTIER, PATHFINDER, XTERRA/ EQUATOR, 2005-14, 2/4WD WARRANTY NOTES 1) The utmost care is taken at Thorley Headers to maintain the highest standards of quality. However, Thorley Headers cannot control the installation of the product. For this reason, the Thorley Headers warranty covers only the replacement of the components - not the labor for the installation.
Page 2
Please call your Doug Thorley Headers distributor if there are any questions regarding the legality of the installation. The Executive Order (“E.O.”) number for this part number is “PENDING”.
Page 3
THY-470 NISSAN/ SUZUKI 4.0L FRONTIER, PATHFINDER, XTERRA/ EQUATOR, 2005-14, 2/4WD INSTALLATION PROCEDURES WARNING! - Do not rely on bumper jacks or chassis jacks for support during header installa- tion. The subject vehicle should be raised and supported with jacking equipment and jackstands or ramps intended for undercarriage auto maintenance.
Page 4
THY-470 NISSAN/ SUZUKI 4.0L FRONTIER, PATHFINDER, XTERRA/ EQUATOR, 2005-14, 2/4WD 7) Remove both manifolds from the bottom of the vehicle. 8) While the passenger side is still jacked up, install the new headers along with the factory gaskets from under the vehicle. Snug the nuts down but do not tighten fully at this time.
Need help?
Do you have a question about the THY-470 and is the answer not in the manual?
Questions and answers