Advertisement
Quick Links
Operation Quick Start Guide V1.3 (from FW-version V1.03) for
Voltage connection :
Voltage:
Power:
Anschlüsse:
Remote access/machine access
without configuration/IT-knowledge
24 V DC ± 20%
9354-CONNECT
9354-CONNECT-HS
9354-CONNECT-LTE
9354-CONNECT-II
9354-CONNECT-II-LTE
Power supply 24V DC
Power ON
on:
flashing: WIFI-communication running
Power supply via USB interface (only 9354-CONNECT)
CONNECT
2W
1,2W
12W
9W
19W
flashing:
permanently ON:
to network (LAN A)
WIFI active
(also with USB-powerbank/-powercord/PC)
synchronisation with partner
connected with partner
to PC (LAN B)
Advertisement
Related Manuals for process-informatik CONNECT Series
Summary of Contents for process-informatik CONNECT Series
- Page 1 Operation Quick Start Guide V1.3 (from FW-version V1.03) for CONNECT Remote access/machine access without configuration/IT-knowledge Voltage connection : Voltage: 24 V DC ± 20% Power: 9354-CONNECT (also with USB-powerbank/-powercord/PC) 9354-CONNECT-HS 1,2W 9354-CONNECT-LTE 9354-CONNECT-II 9354-CONNECT-II-LTE Anschlüsse: Power supply 24V DC Power ON flashing: synchronisation with partner permanently ON:...
- Page 2 Antenna connection: WIFI First commissioning : CONNECT-device creates WLAN network with SSID "CONNECT WIFI" – with active DHCP master (laptop is automatically assigned an IP address) – Connect laptop to this WiFi network and open with – browser the webserver with IP: http://192.168.1.1: LAN-cable in LAN_A-port and open browser webserver with IP: http://192.168.2.1: internet configuration: CONNECT (uses the internet connection of the connected PC)
- Page 3 Gateway (uses own ip-address for internet connection) – – LTE (Only with CONNECT-LTE/CONNECT-II-LTE, uses LTE for the internet connection) Peculiarity: The APN "internet" is standard for most providers, but can be changed if necessary. Insert the SIM card on the right side of the device as shown until there is a slight click, then release the card (it is locked in place) [Reverse to trigger, click until noise and let go =>...
- Page 4 peripheral configuration: CONNECT + GATEWAY – LTE (only for CONNECT-LTE/CONNECT-II-LTE) – partner configuration: Explanation of parameters: device name: Device name (max. 15 characters) device number: Device number (1-65535) for assigning the connection (no double device numbers allowed, please note !) router interface: Interface of the CONNECT to the Internet router (depending on the Internet configuration, only sensible possible interfaces are...
- Page 5 Web interface (after first configuration): Open the CONNECT web interface by clicking "http://192.168.1.1" in your browser with an active WIFI- connection. Or connect your PC to the in the first-configuration specified PC-interface using a LAN-cable and enter "CONNECT" in the address-line of the browser. Click on the 3 stripes in the top left to open the device menu : Overview –...
- Page 6 The status menu shows information about the IP / MAC addresses of the connection and information about the device: (menu item LTE-interface only for CONNECT-LTE/CONNECT-II-LTE) In the Configuration menu, the expert configuration will be carried out differently from the quick commissioning of the device.
- Page 7 LTE settings only with CONNECT-LTE/CONNECT-II-LTE In the Firmware Update menu, the firmware of the CONNECT-device is updated. To do this, download the current firmware file to your PC from the product page. With Browse you select this file and accept it. The file name is displayed in the user interface for checking. By clicking Update firmware, the firmware file is loaded into the device and burned to the flash memory after a positive check.
- Page 8 9354-CONNECT Under the web-address https://www.process-informatik.de are product specific documentations or software-driver/-tools available to download. If you have questions or suggestions about the product, please don’t hesitate to contact us. Process-Informatik Entwicklungsgesellschaft mbH Im Gewerbegebiet 1 DE-73116 Wäschenbeuren +49 (0) 7172-92666-0 info@process-informatik.de...