Advertisement
Quick Links
hadley
media cabinet
style # FKVSLGMDGY (stone gray)
dpci # 249-10-1948
tcin # 53289658
style # FKVSLGMDWH (shell)
dpci # 249-10-1947
tcin # 53289656
>> assembly instructions
© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
Advertisement
Summary of Contents for Hadley FKVSLGMDGY
- Page 1 # FKVSLGMDGY (stone gray) dpci # 249-10-1948 tcin # 53289658 style # FKVSLGMDWH (shell) dpci # 249-10-1947 tcin # 53289656 >> assembly instructions © 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
- Page 2 Congratulations on your latest Target purchase. Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you. All you need to do is follow our simple instructions and you’ll be on your way to transforming your room in no time.
- Page 3 table of contents introduction hardware parts list how to use the cam lock system assembly 7-13 how to adjust door alignment QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.
- Page 4 hardware (H1) x 16 (H2) x 8 (H3) x 8 (H4) x 8 (H5) x 8 (H6) x 10 (H7) x 1 wooden dowel cam bolt bolt lock washer washer allen wrench (H8) x 2 (H9) x 4 (H10) x 29 (H11) x 6 (H12) x 16 (H13) x 8...
- Page 5 exploded diagram ITEM DESCRIPTION QUANTITY top panel left side panel right side panel left partition right partition outer adjustable shelf inner adjustable shelf bottom panel center foot left door right door inner back panel left back panel right back panel...
- Page 6 how to use the cam lock system Screw cam bolt into panel Align cam bolt(s) with cam(s) Push cam into panel - arrow feature and insert all the way into on cam top points to panel edge cross-bored hole(s) Rotate cam(s) clockwise 180° to Panels should be tight against each lock panels together other and connection should be rigid...
- Page 7 step 1: attach left and right partition panels to bottom panel (H1) x 4 (H2) x 4 (H3) x 4 wooden dowel wooden dowel wooden dowel 1.1. Carefully tap small wooden dowels into place in left partition and right partition. Leave 1/2” of the dowels sticking out. 1.2.
- Page 8 step 2. attach side frames (H1) x 4 (H4) x 4 wooden dowel bolt (H5) x 4 (H6) x 4 (H7) x 1 lock washer washer allen wrench 2.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out. 2.2.
- Page 9 step 3. attach top panel (H1) x 8 (H2) x 4 (H3) x 4 (H4) x 4 wooden dowel cam bolt bolt (H5) x 4 (H6) x 4 (H7) x 1 (H8) x 2 (H9) x 4 (H9) x 4 lock washer washer allen wrench...
- Page 10 step 4: attach back panel FAILURE TO FOLLOW ALL DIRECTIONS ON THIS PAGE MAY RESULT IN UNEVEN DOOR ALIGNMENT Begin by installing all of the screws along one edge of the back panel. Next, using a square or tape measure, make sure that the cabinet is square.
- Page 11 step 5: install adjustable shelves (H12) x 16 shelf support 5.1. Insert shelf supports into desired hole. Different holes accommodate different shelf heights. 5.2. Angle shelf to fit between the rails and set on top of shelf supports.
- Page 12 step 6: attach doors to side frames (H14) x 2 (H15) x 2 (H13) x 8 knob bolt knob flat head screw 6.1. Align bolts with pre-drilled holes. 6.2. Do not over tighten bolts.
- Page 13 step 7: install anti-tip kit (H17) Position against wall (H16) Mark position of strap hole on wall Mark position of strap hole on wall Drill 1/4” hole Tap in wall anchor (H19) (H6) (H6) (H18) Fasten anti-tip strap with wall screw Fasten anti-tip strap with wall screw provided provided...
- Page 14 how to adjust door alignment Tips for proper door alignment: -Adjustable levelers will reduce minor door mis-alignments caused by an uneven floor. -Use a level to determine if the cabinet top is level. If not, start with the levelers retracted and adjust them as needed.To retract the levelers turn them counterclockwise.
- Page 15 1. WARNING - Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys placed on the furnishing may encourage a child to climb on the furnishing and as a result the furnishing may tip over on to the child. 2.
- Page 16 © 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.