Heatlie Barbecues Hotbox HB6000SS Instructions And General Information
For more information, please visit heatlie.com.au
Subscribe to Our Youtube Channel
Related Manuals for Heatlie Barbecues Hotbox HB6000SS
Summary of Contents for Heatlie Barbecues Hotbox HB6000SS
- Page 1 Heatlie Engineering ABN 55 111 671 008 60 Kinkaid Ave North Plympton SA 5037 Ph (08) 8376 9330 Email: info@heatlie.com.au www.heatlie.com.au Date: 18 November 2016 Heatlie Hotbox Instructions and General Information.
- Page 2 THE HEATLIE HOTBOX HB6000SS & HB9000SS The Heatlie Hotbox has the following advantages: • Does not require electricity to work, so it can be used in remote areas where power is unavailable. • Using Universal L P gas only, the Hotbox is capable of heating food for large crowds. •...
- Page 3 The Heatlie Hotbox (HB6000SS) closed, shows how the hose and regulator can be stored. Container contents: For HB6000SS • 1 Heatlie Hotbox with capacity to hold 12 shelves • 6 shelves • Complete slide in burner housing For HB9000SS • 1 Heatlie Hotbox with capacity to hold 17 shelves •...
- Page 4 Assembly The Hotbox is delivered fully assembled. All you have to do is unpack it and connect the hose and regulator to a Universal LP gas supply. Hotbox burner slide in unit. The burner is housed in a stainless steel slide in box at the bottom of the hotbox. This box contains the gas controls, including the tap which incorporates the flame failure and thermostat, piezo igniter, high temperature cable, electrode, thermocouple, and the burner.
- Page 5 Operation Before lighting 1. REMOVE ALL PROTECTIVE PLASTIC FILM FROM STAINLESS STEEL SURFACES BEFORE INITIAL USE. 2. Be sure the Hotbox is at least 200mm away from any combustible surface. 3. It should be placed on a firm, solid surface. 4.
- Page 6 Trouble Shooting – Problem Solving Fault Solution Hotbox burner won’t light 1. Make sure gas is connected and turned on 2. Check the piezo igniter is sparking. To do this click the button and see the spark come out the end of the electrode wire. Make sure the piezo cable is properly connected and intact, if it is still not lighting the piezo is not working and needs replacing.
- Page 7 Spare parts are available from Heatlie. Please contact the place of purchase, and they will source them for you, if they don’t already carry them in stock. Repairs should be carried out by authorised service centres, or Heatlie Barbecues. It is the customer’s responsibility to cover freight costs when sending goods back to Heatlie for repair.
- Page 8 Designed and manufactured by: M&A Mead Investments Pty Ltd t/as Heatlie Engineering ABN 55 111 671 008 60 Kinkaid Ave NORTH PLYMPTON SA 5037 Phone (08) 8376 9330 Email Address: Info@heatlie.com.au Web Page: www.heatlie.com.au Warranty Policy Heatlie Engineering warrants its products to be free of original manufacturing defects in material and workmanship, for a period of ten years from the date of purchase of purchase for domestic use and one year for commercial use.
Need help?
Do you have a question about the Hotbox HB6000SS and is the answer not in the manual?
Questions and answers