Step 2 Insert The Brains, Connect The Nose - Bona Caeli AIRKit User Manual

Step 2 Insert the brains, connect the nose

Cut the foam into five equal sized pieces. Save one of them
for later, take the other four and stick them to LCD screen
(4) and the CO sensor (3).
2
Push the feet (12) through the holes on the microcontroller
board (2) stick it to the inside of the box.
Using the I C cables (5) connect the microcontroller board
2
(2) to the CO sensor (3) and the LCD Screen (4). The I C
2
2
connectors only fit one way. Make sure you are connecting
them to the I C ports on the board, not the UART - they are
2
labelled. Once everything is connected, place all the
components in the box.
7 | P a g e