Step 4 Start Measuring - Bona Caeli AIRKit User Manual

Step 4 Start measuring

Flip on the power switch (10). The LED Screen (4) will turn
on and the first reading will be displayed. There will also be
a green light on the microcontroller board (2).
If you wish to power the AIRKit for a long period of time,
AIRKit
connect the to a USB power source by connecting
the USB-C cable to the micro controller board.
Close the box so that the CO Sensor is exposed to your
2
surroundings.
Leave for 10 seconds to allow the sensor to settle and
display the first true value of your CO exposure.
2
Enjoy and start experimenting!
9 | P a g e