Do you have a question about the AT1 and is the answer not in the manual?
Questions and answers
Blake topping
May 2, 2025
Can my po use this to record conversations or feds
1 comments:
Mr. Anderson
May 17, 2025
No. The Attenti AT1 is not intended or described for use in recording conversations or federal communications. Its function is limited to electronic monitoring using GPS, cellular, and Wi-Fi networks.
This answer is automatically generated
Don
March 21, 2025
What does it mean when only the power light is flashing and flashing green no other lights is flashing?
1 comments:
Mr. Anderson
May 14, 2025
When the power light on the Attenti AT1 is flashing green and no other lights are flashing, it typically indicates that the device is powered on and functioning normally, with no alerts or issues requiring attention.
This answer is automatically generated
Christopher Robbins
March 13, 2025
What does it mean when the zone light flashes and unit vibrates but stops on its own without having to press the acknowledge button and I have not left my residence?
1 comments:
Mr. Anderson
March 13, 2025
When the zone light on the Attenti AT1 flashes and the unit vibrates but stops on its own without pressing the acknowledge button while still at home, it likely means that the device temporarily detected that you were outside your allowed zone or in a forbidden area. However, the alert cleared automatically, possibly due to reacquiring a proper location signal or updated zone information. If the alarm had required manual acknowledgment, the flashing would have continued until the button was pressed.
This answer is automatically generated
Kaelan
January 30, 2025
How long does ankle monitor battery life last once starting vibrating red
1 comments:
Mr. Anderson
February 10, 2025
When the Attenti AT1 ankle monitor starts vibrating and showing a red PWR LED, it indicates that the battery is low. The manual does not specify the exact remaining battery life at this stage, but the device must be charged for a minimum of 2 hours per day.
Page 2
1-Piece (AT1) Offender User Guide 1-Piece (AT1) Offender User Guide March 4, 2019...
Page 3
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Attenti. The information in this document is subject to change without notice. The software mentioned in this document is furnished under license and may only be used or copied in accordance with the terms of such license.
Page 4
Intended Use: This Attenti device is part of an electronic monitoring system, which performs data transfer using cellular and Wi-Fi networks to a monitoring platform. This device has not been tested for and is not intended for use on airplanes, in hazardous environments, in healthcare facilities, or where cellular phones or other intentional transmitters are restricted.
Page 5
Do not unplug AC/DC adapter by power cord. Handle the adapter by the body only. Do not modify, decorate, or attempt to service the device. Return to Attenti authorized personnel or location for repair or service. There are no user serviceable parts.
Page 6
1-Piece (AT1) Offender User Guide Responding to Vibrations/Flashing LEDs The device will vibrate three consecutive times if an alarm has been generated. View the flashing LED(s) on the top of the device and follow the below steps to clear the alarm.
Page 7
1-Piece (AT1) Offender User Guide FCC and Industry Canada Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 8
RF exposure and Specific Absorption Rate when used in ankle worn configuration with an Attenti bracelet designated for this product. The use of accessories not approved by Attenti may cause your device to malfunction or in the case of unapproved electrical accessories may cause the device to exceed RF energy exposure guidelines.
Need help?
Do you have a question about the AT1 and is the answer not in the manual?
Questions and answers
Can my po use this to record conversations or feds
No. The Attenti AT1 is not intended or described for use in recording conversations or federal communications. Its function is limited to electronic monitoring using GPS, cellular, and Wi-Fi networks.
This answer is automatically generated
What does it mean when only the power light is flashing and flashing green no other lights is flashing?
When the power light on the Attenti AT1 is flashing green and no other lights are flashing, it typically indicates that the device is powered on and functioning normally, with no alerts or issues requiring attention.
This answer is automatically generated
What does it mean when the zone light flashes and unit vibrates but stops on its own without having to press the acknowledge button and I have not left my residence?
When the zone light on the Attenti AT1 flashes and the unit vibrates but stops on its own without pressing the acknowledge button while still at home, it likely means that the device temporarily detected that you were outside your allowed zone or in a forbidden area. However, the alert cleared automatically, possibly due to reacquiring a proper location signal or updated zone information. If the alarm had required manual acknowledgment, the flashing would have continued until the button was pressed.
This answer is automatically generated
How long does ankle monitor battery life last once starting vibrating red
When the Attenti AT1 ankle monitor starts vibrating and showing a red PWR LED, it indicates that the battery is low. The manual does not specify the exact remaining battery life at this stage, but the device must be charged for a minimum of 2 hours per day.
This answer is automatically generated
Does this device monitor alcohol consumption?
How long is battery life on full charge?