System Selection; System Type; Operating Mode - GRUNDFOS ALLDOS Oxiperm C 164 Series Operation And Service Manual

7.6 System Selection

7.6.1 System Type

7.6.2 Operating Mode

38
Define the system size and the operating mode in the "System selection" menu.
You can cancel the input at any time using the "Escape" key.
The activated system type or the activated mode is displayed flashing on the
display.
●
Scroll in the main menu using the "Arrow right" key on page 2.
●
Use the "F1" key to switch to the "System selection" menu.
●
In the "System selection" menu, switch to the "System type" menu using the
"F1" key.
●
Select the system size using the "F1", "F2" or "F3" keys, scroll if necessary
using the "Arrow right" or "Arrow left" key.
Following selection of the system type, the following message is displayed:
Display:
●
Use the "Enter" or "Escape" key to return to the "System selection" menu.
NOTE The system is preset in the factory, i.e. the selected
type of system is displayed flashing in the "System
selection" menu.
Check this setting for correctness prior to starting up,
or select a new system type.
Two different operating modes can be selected for the Oxiperm systems:
☞
Auto / Manual
NOTE The operating mode is preset in the factory, i.e. the
selected mode is displayed flashing in the "Operating
mode" menu.
Check this setting for correctness prior to starting up,
or select a new operating mode.
In the "System selection" menu, switch to the "Operating mode" menu using the "F2"
key:
Auto / Manual
●
In the "Operating mode" menu, activate Auto / Manual using the "F1" key.
Display:
●
Use the "Enter" or "Escape" key to return to the "Operating mode" menu.
System type
C164-XXXXC
activated
- Control of system using control console
Auto / Manual
activated
Oxiperm 164C 4-10 kg en
V5.0