Frico IHMC6-3 Original Instructions Manual
  1. Manuals
  2. Brands
  3. Frico Manuals
  4. Controller
  5. IHMC6-3
  6. Original instructions manual

Frico IHMC6-3 Original Instructions Manual

Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
Original instructions
IHMC6-3
FR
GB
.... 8
.... 2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IHMC6-3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Frico IHMC6-3

Summary of Contents for Frico IHMC6-3

  • Page 1 Original instructions IHMC6-3 ..8 ..2...

  • Page 2: General Instructions

    (for International Standards refer to I.E.C/ directive IEC950). WARNING It is important that the IHMC6-3 is not mounted directly to any flammable material i.e. wood. It is recommended that the heatsink be speced off the mounting wall using pillars to aid in heat dissipation.
  • Page 3 IHMC6-3 INTRODUCTION The IHMC6-3 is a microprocessor based power controller which has been designed to offer variable control for 3 separate 2kW loads from a 3-phase supply. The units have been manufactured to offer easy installation and functionality. The system consists of three elements: A HMI unit 1 (Human Machine Interface)
  • Page 4 Any application were high inrush current is an issue or control is required. Typical use is for Switch on the 3 phase supply to the IHMC6-3 and Infrared Heating lamps and Garden lighting. verify the green ‘POWER’ LED is lit and the HMI digits are lit.

  • Page 5: System Parts

    SYSTEM PARTS The power unit The HMI allows the user to control up to 9 The IHMC6-3 is designed to accept a 230V one individual BHC4002-ER units either via the push phase supply. The unit has a 2 stage supply filter...
  • Page 6 IHMC6-3 INSTALLATION CIRCUIT Table A Table B Neutral 4 core low voltage cable 3 phase supply 400V AC 50Hz Load 3 Earth Output Max. 2kW Load 2 output Max. 2kW Load 1 Output Max. 2kW...

  • Page 7: Configuration Options

    IHMC6-3 CONFIGURATION OPTIONS The IHMC6-3 has been designed and tested to allow each controller to be mapped to either 2 channels (2 power level settings per 2 outputs) or 1 channel (1 power level setting per 2 outputs). Please note that no mapped channels should appear with the same channels numbers.
  • Page 8 Main offi ce Frico AB Tel: +46 31 336 86 00 Industrivägen 41 SE-433 61 Sävedalen mailbox@frico.se Sweden www.frico.net For latest updated information and information about your local contact: www.frico.net.

Table of Contents