Godrej UV CASE Quick Start Manual

Quick Start Guide
GODREJ UV CASE OPERATIONAL DESCRIPTION
COMMON INSTRUCTIONS
Connect the Godrej UV Case to a 5 amp AC (alternating current) main supply. Always ensure that you
are using a proper earthed 230 V AC supply.
Before opening the door, it is always recommended to switch OFF the Godrej UV Case using the On/
Off switch.
Do not place things on top of each other.
Do not keep batteries, power banks, and medicines in the Godrej UV Case.
For safety purposes, auto-cut off provision is available. During the UV sanitization process, if someone
opens the door, the UV lamps will switch off automatically.
GODREJ UV CASE 67LTR OPERATION WITH MULTISPAN MDT4310
Switch ON the AC (alternating current) main supply. The On/ Off switch is
provided to operate the Godrej UV Case.
Godrej UV Case has a settable timer which is set to 5 minutes (300 seconds)
(default setting). Press the "+" or "-" button provided on the timer to set your
customized time. (Range of time can be set from a minimum of 180 seconds
to a maximum of 999 seconds).
Rotate the knob anticlockwise to open the door. Put your belongings i.e
mobile, watch, car keys, packaged food, etc. inside the cabinet. Multiple items can be placed at once.
Close the door and rotate the knob clockwise to lock the door. Then, switch ON the power supply of
the Godrej UV Case using the On/ Off switch.
Once the door is locked, UV lamps of the Godrej UV Case will switch ON automatically. As per the
default setting, the timer starts reverse counting from 300 seconds. When the timer reaches "0"
seconds, the timer automatically switches off the Godrej UV Case. The buzzer beep notifies the user
about the successful completion of the sanitization cycle. Now, switch OFF the Godrej UV Case using
the On/ Off switch. This will stop the buzzer from beeping. Open the Godrej UV Case to take out the
sanitized items.