lb Lautsprecher Display DL Series Operation Manual page 6

Display speakers and soundbars
Table of Contents

Advertisement

DL-A 2.0 Display Speaker
Active Stereo Display Speaker Pair with integrated DSP
 Active stereo speaker pair with DSP
 Very linear frequency range
 Optimized speech intelligibility
 2 × 50 watts power capacity
 Automatic switch-on
 Customized versions with height on measure for
display heights from 600 up to 1600 mm
 VESA mounts for display widths up to 2400 mm
Technical Data DL-A 2.0
Principle
Components
Frequency range
Amplifi er output
Sensitivity
Nominal dispersion
Connector
Active speaker
Connector
Passive speaker
Input sensitivity
Operational controls
Automatic switch-on
Power supply
Mains connection
Dimensions (W × H × D)
Weight
Material
Fastening points
Warrenty
Customized versions: Individual display speakers
from 600 mm up to 1600 mm height.
6
Active stereo speaker pair with
class-D amplifi ers and DSP.
Left speaker with amplifi er module,
right speaker passive.
2 × 2.5" full-range drivers + 2 × 2.5"
woofers + 4 × 2.5" passive radiators
55 Hz – 20 kHz
2 × 50 watts
max. 109 dB (1W/1m)
120°
Input cinch stereo, pluggable
system terminals to connect passive
speaker and extern power supply,
input cable mini jack 3.5 mm to cinch,
1.5 m;
Connecting cable with plug
-6 dBU for full modulation, input-
impedance 10 kohms
Volume control, LED ON/Clip
witches into an idle state (SLEEP)
S
automatically when the input signal
is absent for over 5 min.
Extern power supply 24 VDC, 40 VA
90 – 240 VAC
80 × 700 × 48 mm (per speaker)
6 kg (pair)
Cabinet aluminium, front precision
steel grille, powder-coated, black
Threaded inserts 2 × M 6 at rear
(per speaker)
3 years
DL 2.0 Display Speaker
Passive Stereo Display Speaker Pair
 Passive stereo speaker pair
 Very linear frequency range
 Optimized speech intelligibility
 2 × 50 watts power capacity
 4 ohms impedance
 Customized versions with height on measure
from 600 up to 1600 mm
 VESA mounts for display widths up to 2400 mm
Technical Data DL 2.0
Principle
Passive stereo speaker pair
Components
2 × 2.5" full-range drivers + 2 × 2.5"
woofers + 4 × 2.5" passive radiators
Frequency range
55 Hz – 20 kHz
Impedance
2 × 4 ohms
Power capacity
2 × 50 watts
Sensitivity
max. 109 dB (1W/1m)
Nominal dispersion
120°
Connectors
Pluggable system terminals
Dimensions (W × H × D)
80 × 700 × 48 mm (per speaker)
Weight
6 kg (pair)
Material
Cabinet aluminium, front precision
steel grille, powder-coated, black
Fastening points
Threaded inserts 2 × M 6 at rear
(per speaker)
Warrenty
3 years

Advertisement

Table of Contents
loading

Table of Contents