Summary of Contents for Eaton FlexiTech ZNO2047700 PrC
Page 1
Manual Manuale / Manuel / Betriebsanleitung / Manuál / Navodila / Priručnik / Uputstvo / Használati utasítás / Instrukcja ZNO2047700 PrC 11/2019 + 45°C FlexiTech Exit Dual AT L’ + 5°C LiFePO 120 mm Before use 228 mm 34 mm 228 mm Ref.
Disconnect the battery, wait for 10 seconds, and reconnect it if you decide to change configuration (steps 2-3). PICTOGRAM CONFIGURATION CLICK 2 CLICK 1 CEILING MOUNTING Back See steps 5 c-d. FLEXITECH EXIT DUAL AT L’ ZNO2047700 PrC 11/2019 www.eaton.com...
Page 5
- Cabling of connectors with a screwdriver. - Break through a cable entry using - Drill in the honeycomb - Cabling of connectors by hand. a screwdriver. zones or in the flexible Before use - Rigid or flexible wire material. - Check the packaging for the whole cabling - If cable entry on the right - Drilling zones to avoid...
Page 6
- Even/ Odd Disconnect the battery, - Duration Test - Autotest - LED Description wait for 10 seconds, Day D - Charge / - Green / Yellow - Non-maintained - Installation date and reconnect it if you -Maintained - Battery - Duration Test Lamp / Battery - Constant /...
Page 7
- Magnet Test - Replaceable - Functional Test - Not replaceable Ceiling - Back - Duration Test Pictogram - Battery pack, Order code configuration mounting - See steps 4c-d - Reset luminaire - If the battery duration is insufficient, - DIM level replace the battery.