Advertisement
Quick Links
Advertisement
Related Manuals for ZMODO Snap SD-H2304
Summary of Contents for ZMODO Snap SD-H2304
- Page 1 Snap Quick Start Guide SD-H2304...
- Page 2 Getting to Know Your Snap Snap is a true wireless IP camera with a built-in rechargeable battery. You can install your Snap anywhere in your home without any complicated installation or wiring. Once you place or mount your camera, you will be notified when your Snap needs to be recharged from the meShare app.
-
Page 3: What's In The Box
What’s in the Box : Snap Wireless Charging Pad (Wireless Camera) Power Adapter Mounting Bracket Installation Hardware Snap Quick Start Guide SD -H2304 Quick Start Guide... -
Page 4: Mobile Setup
Mobile Setup Please refer to the following instructions to configure your Snap. For detailed instructions and troubleshooting, please visit: www.zmodo.com/support Before you begin: You will need a strong 2.4GHz WPA/WPA2 WiFi network connection at the location of your hub. Make sure you know the SSID (WiFi network name) and password of the 2.4GHz WPA-PSK/WPA2-PSK WiFi... - Page 5 Log in and press the Add Device option in the upper right corner of the Home Page. Make sure that you have powered on the hub, and then press and hold the power button for at least 3-5 seconds to power on your Snap. Tap “Start installation”...
- Page 6 Hub Placement Suggestions After completing setup, unplug your hub and follow the instructions below to find an optimal location for it. Selecting a location for your hub: Make sure that the hub is within range of your WiFi router and within reasonable distance to your Snap. Avoid a location with electronic appliances that generate strong magnetic or electric fields, such as microwave ovens or refrigerators.
- Page 7 Status Light Definitions Hub Status Light Definition Blinking White The hub is not yet connected to the WiFi network. Solid White The hub is successfully connected to a WiFi network. Snap Status Light Solid Green Snap is powering on. Blinking Green Snap is ready for setup.
- Page 8 Charging your Snap You will receive an alert on your smartphone through the meShare app whenever your Snap needs to be recharged. Please follow the steps below to charge your Snap: Remove the Snap from the mounting bracket if mounted. Plug in the wireless charging pad to a power outlet using the included power adapter.
- Page 9 Mounting your Snap Once your Snap has been connected to a WiFi network, you can mount or place it on any flat surface. Please make sure that your Snap is within range of the hub, and that it is fully charged before installation.
- Page 10 Fasten the Snap to the mounting bracket using the included screw and washer, and adjust the camera for an optimal viewing angle.
- Page 11 Main Features Snap allows you to monitor your home day and night. You can see your loved ones directly from your smartphone. You can access your Snap's full features by using the meShare ® app on your Android or iOS smartphone. You can also view your Snap using any web browser by logging into user.meshare.com...
- Page 12 180° wide-angle view A 180° ultra wide-angle view allows you to capture more of your space, all at once. Automatic fisheye correction means that you get a bigger, more detailed, and more accurate picture of your space. Smart motion detection Snap will wake up and record a video clip whenever motion is detected, making sure that you are kept in the loop for the important moments.
-
Page 13: Troubleshooting
Troubleshooting You can check your camera’s status light to determine if your camera has been connected to the WiFi or not. If it is blinking green, it means that it has not been connected to the WiFi network and you may need to retry the setup method. - Page 14 Enjoy your Zmodo product Your feedback means a lot to us! Please share your positive experience on your favorite social media site to help spread the word. Like us on Facebook.com/Zmodo Follow us on Twitter @Zmodo REV-A03...