LED Group Robus RVA4Z-RC Instruction Manual

VEGAS 4 ZONES, RF REMOTE CONTROL FOR SINGLE COLOUR,
RGB AND RGBW LED FLEXI STRIPS
RVA4Z-RC
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES.
! Electrical products can cause death or injury, or damage to property. If in any doubt about the installation or use of this product,
consult a competent electrician
Product technical information and specification may change over time without prior notification. For the latest technical
information please visit our web site www.robus.com or robusdirect.com
-20°C < Ta < +40°C, Battery: DC3V (AAA*2), Remote Control Distance: 20m
Type 1: Control the single colour LED strip
Set Key
OFF
DIM Ring
Night light - 10% brightness
Brightness - (5 levels)
Brightness - (1024 levels)
Speed -
Zone selection
Name
SET Non function
I Turn on
O
Turn off
DIM ring Dim down brightness along with clockwise direction
M 2 modes in total : flash and fade
W Night light hot key: 10% brightness
- Brightness – by 5 levels (10%, 30%, 50%, 70%, 100%).
+ Brightness + by 5 levels (10%, 30%, 50%, 70%, 100%).
B- Brightness – by 1024 levels. Long-press can get fast adjusting.
B+ Brightness + by 1024 levels. Long-press can get fast adjusting.
S- Speed down for dynamic mode (100 levels). hold on the key to get fast adjusting.
S+ Speed up for dynamic mode (100 levels). hold on the key to get fast adjusting.
Zone Zone selection, hold on the key in 2 seconds to get "all-control"
The Installation must be carried out by a qualified electrician
LED Group Australasia
9/210 Queensport Road North Tel: 07 3890 5444
Murarrie Fax: 07 3890 4777
QLD 4172 Email: purchases@robus.com.au
Australia Website: www.robus.com.au
Issue 1 100918
INSTRUCTION MANUAL
Note:
RF signal indicator
ON
Mode
Brightness + (5 levels)
Brightness - (1024 levels)
Speed +
Zone indicator
Description
PLEASE READ INSTRUCTION BEFORE COMMENCING INSTALLATION AND RETAIN FOR FUTURE REFERENCES.
! Electrical products can cause death or injury, or damage to property. If in any doubt about the installation or use of this product,
consult a competent electrician
Product technical information and specification may change over time without prior notification. For the latest technical
information please visit our web site www.robus.com or robusdirect.com
Type 2: Control the LED strip of CW + WW
Set Key
OFF
CCT Ring
Night light - 10% brightness
Brightness - (5 levels)
Brightness - (1024 levels)
Speed -
Zone selection
Name
SET Non function
I Turn on
O
Turn off
CCT ring Tunable LED CCT between 100% CW and 100% WW
M 4 modes in total: all flash, 2 color flash, all fade, 2 color fade.
W Night light hot key: 10% brightness
- Brightness – by 5 levels (10%, 30%, 50%, 70%, 100%).
+ Brightness + by 5 levels (10%, 30%, 50%, 70%, 100%).
B- Brightness – by 1024 levels. Long-press can get fast adjusting.
B+ Brightness + by 1024 levels. Long-press can get fast adjusting.
S- Speed down for dynamic mode (100 levels). hold on the key to get fast adjusting.
S+ Speed up for dynamic mode (100 levels). hold on the key to get fast adjusting.
Zone Zone selection, hold on the key in 2 seconds to get "all-control"
The Installation must be carried out by a qualified electrician
Note:
RF signal indicator
ON
Mode
Brightness + (5 levels)
Brightness - (1024 levels)
Speed +
Zone indicator
Description
Page 1