Advertisement
Quick Links
1. Leave OR table pads in place, then place OR bedsheet on top.
2. Pre-Assemble the Positioner. Assemble flat bar into bottom groove of Lumbar Support Base. Assemble
washer and locking knob.
3. Roll the patient on their side.
4. Attach Bariatric Extension Plate (1101-BE). ).
5. Attach Contoured Lumbar Pad for left or right hip application.
De Mayo Hip Positioner
OBESE
(Large Patient)
System
®
Set Up Instructions
on.
Advertisement
Related Manuals for IMP De Mayo Hip Positioner System OBESE
Summary of Contents for IMP De Mayo Hip Positioner System OBESE
- Page 1 De Mayo Hip Positioner System ® OBESE Set Up Instructions (Large Patient) 1. Leave OR table pads in place, then place OR bedsheet on top. 2. Pre-Assemble the Positioner. Assemble flat bar into bottom groove of Lumbar Support Base. Assemble washer and locking knob.
- Page 2 2 6. Assemble Lumbar Support Base into the imp® Rail Clamp at a position even with the patient’s iliac crest. Use the Vertical Bar in a straight and upright position as a guide to aim at the patient’s iliac crest.
- Page 3 De Mayo Hip Positioner System ® OBESE Set Up Instructions (Large Patient) page 3 8. Place Anterior Patient Protector Pad onto the Anterior Support Assembly. 9. Slide the “Large” Anterior Support Assembly over Crossover Bar #2. Rotate Anterior Vertical Bar #3, and adjust Anterior Pelvic Support #4, so that the Anterior Patient Protector Pad contacts the superior st Anterior Pelvic so that the Anterior Pat...
- Page 4 Add the Stabilizing Bar Tube by sliding it from the anterior side of the patient into the opening of the Anterior Support Assembly. Slide the Stabilizing Bar Hook into the imp® Rail Clamp. Attach to the threads of the Stabilizing Bar Tube, and tighten both knobs.