Push plate with integrated 900 mhz wireless transmitter (4 pages)
Summary of Contents for BEA LPR36 Series
Page 1
LPR36 Low-profile push plates 10LPR36-HW (hard-wired) 10LPR36-900 / 10LPR36-433 / 10LPR36-300 (wireless) DESCRIPTION 1. Top end cap 2. Plate assembly 3. Bottom end cap BATTERY REPLACEMENT: 300 MHz - A23 12-volt 433 MHz - CR2032 3-volt 900 MHz - CR2032 3-volt 75.5701.04 LPR36 20180913 75.5701.04 LPR36 20180913 Page 1 of 4...
Page 2
DO NOT attempt any internal repair of the components. All repairs and/or component replacements must be performed by BEA, Inc. Unauthorized disassembly or repair: 1. May jeopardize personal safety and may expose one to the risk of electrical shock.
Page 3
MOUNTING Do not remove the face plate during mounting. To install the push plate, first After removing the top end Make necessary wiring remove the top end cap by cap, remove the top and connections. Ensure excess removing its screw covers and bottom locking hole screws.
Page 4
BEA strongly recommends that installation and service technicians be AAADM-certifi ed for pedestrian doors, IDA-certifi ed for doors/gates, and factory- trained for the type of door/gate system.
Need help?
Do you have a question about the LPR36 Series and is the answer not in the manual?
Questions and answers