TAWI ViperHoist Series User Manual page 5

1. Suspension. The hoist is designed to be suspended in two track trolleys. Use for ergonomic
handling when lifting the hoist.
2. Top unit.
3. power supply 230V 50Hz/60Hz. The hoist can be connected to all electric supply networks
with current as listed above. The power supply must have a 10A fuse.
4. Maneuver cable. The maneuver cable is a screened multi conductor cable and may not be
replaced with anything but original parts.
5. lifting wire. May only be replaced with original spare parts.
6. Wire attachment. Swiveling attachment. Blocking the swivel will cause serious damage to the
wire.
7. Emergency stop. locked by pushing, released by turning the knob.
8. operation thumb wheel. Controls lifting speed and direction. Move left to go down. Move right
to go up.
9. Handle
10. Hook attachment. Swiveling attachment for unlimited rotation of hook.
Specification:
lifting capacity
power supply
Frequency
lifting height
lifting speed
Dead weight
Speed control
60 kg 120 kg
230V +/- 10% 230V +/- 10%
47-63 Hz 47-63 Hz
2000 mm 2000 mm
0.75 m/s 0.35 m/s
25 kg 25 kg
Variable Variable
GEnErAl DESCrIpTIon •
5