Page 2
Directive ____ /___ /__ Additional directives, ATEX , Pressure Vessels The following harmonizing standards also apply; 2006/42/EC 2006/95/EC 2004/108/EC SS-EN ISO 12100:2010 SS-EN 60204-32 Place; KUNGSBACKA, SWEDEN Date; …………………………………………………………… Signature; Signature; Thomas Bräutigam, CEO TAWI Holding Jonas Lindholm, Responsible for the technical dossier...
Contents General description Installation User’s guide Safety Instructions Service record Change wire Dimensions, general overview ViperHoist60/120 Exploded view and parts list, top unit ViperHoist60/120 Exploded view and parts list, operating handle Electric schedule ViperHoist handling analysis Check list ViperHoist Special project, specifikation...
• GEnErAl DESCrIpTIon 1 General description 1. General description Congratulations on your choice of TAWI lifting equipment! The following pages introduces you to your new ViperHoist. read this manual carefully before operating. TAWI Guarantee Time of guarantee is 1 year from date of delivery. This guarantee covers the replacement or repair of defect parts of the hoist.
Page 5
GEnErAl DESCrIpTIon • 1. Suspension. The hoist is designed to be suspended in two track trolleys. Use for ergonomic handling when lifting the hoist. 2. Top unit. 3. power supply 230V 50Hz/60Hz. The hoist can be connected to all electric supply networks with current as listed above.
Page 6
• GEnErAl DESCrIpTIon Warnings and labels WArnInG! read the instructions manual carefully before using the hoist. operating handle. The maximum lifting capacity of the two hoists. please view which maximum lifting capacity applies to your hoist. The controls for lifting up and down consist of one flip button that can be turned sideways.
InSTAllATIon• 2 Installation 1. Check that the delivery corresponds with the delivery note. The hoist is delivered fully assembled. 2. Make sure that the suspension device is approved for minimum 1,5 x maximum lifting capacity of the hoist. The suspension chosen must be approved for lifting purposes and designed for a maximum lifting capacity of AT lEAST the weight of the load AnD the dead weight of the hoist.
• USEr’S GUIDE 3 User’s guide operating instructions: operating the hoist is accomplished by moving the thumb wheel left (down) or right (up). The lifting speed is adjusted by means of increasing/decreasing the angle the thumb wheel is moved. preliminary check: Check the function of the upper limit switch by running the hoist upwards until the switch stops the hoist.
SAFETY InSTrUCTIonS• 4 Safety Instructions To ensure maximum personal safety it is essential to avoid all incorrect use: • Do not allow untrained staff to operate the hoist. • Do not exceed the hoists maximum lifting capacity. • never use the hoist for lifting person/persons. •...
• SErVICE rECorD 5 Service record SErVICE rECorD ViperHoist TAWI periodical inspection: Frequency* Daily Monthly intervals intervals Thoroughly check the lifting wire, fasteners and hook for damage and wear. Check the function of the emergency stop switch before using the hoist.
CHAnGE WIrE• 6 Change wire 1. Unscrew the two lower nuts 2. Same as picture no 1, detai- 3. pull out the two threaded for the cover on the side clo- led picture. bars on the opposite side, ap- sest to the wire. proximately 150mm, until the first and second cover profiles are loose.
VIpErHoIST60/120• 8 ViperHoist60/120 ViperHoist60 Description (available in Art nr english only) Top unit, ViperHoist60 254000 Handle, complete 256000 Handle, complete Top unit No Qty Description ViperHoist120 pcs/ Description (available in Art nr english only) Top unit, ViperHoist120 255000 Handle complete 256000 Handle, complete Top unit...
• EXploDED VIEW AnD pArTS lIST, Top UnIT VIpErHoIST60/120 9 Exploded view and parts list, top unit ViperHoist60/120...
Page 15
GEnErAl DESCrIpTIon • TAWI ViperHoist60 Description (available in pcs Art nr nr Description (available in Art nr english only) english only) 33 Side profile 255030 Motor plate 255060 34 Side profile 255032 Spring holder 255110 35 Side profile 255031 Coil...
Page 16
• GEnErAl DESCrIpTIon TAWI ViperHoist120 Description (available in pcs Art nr nr Description (available in pcs Art nr english only) english only) 33 Side profile 255030 Motor plate 255060 34 Side profile 255032 Spring holder 255110 35 Side profile 255031...
VIpErHoIST HAnDlInG AnAlYSIS• 12 ViperHoist handling analysis issue W W W . T A W I . C O M Issue Iper OIsT AndlIng nAlysIs :........:............. OMpAny nAMe :........:............eferenCe dATe Goods to be handled: Type of material (wood, metal, plastic etc): Size of goods (L x W x H/ Ø): Max and min weight: Max:...
Page 20
• VIpErHoIST HAnDlInG AnAlYSIS Suggested suitable type of lift and tool: Type of lift: Type of tool Type of accessories Other important info: Sketch required below:...
CHECK lIST• 13 Check list • ViperHoist – Tested with ....kg load. • Check that the manouvre handle is correctly assembled • Check emergency stop button. • Check wire connection. • Top and buttom switch – check function. • Check that all bolts/nuts are sufficiently tightened. •...
Deviations from standard construction You have ordered a ViperHoist from TAWI with one or more special features. This document describes those special features and their effects on everyday operation. This is an important enclosure to the main installation manual and must be made available to all operators at all times, along with the main manual.
Page 23
VIpErHoIST SpECIAl projECT, SpECIFIKATIon•...