Advertisement
Description
Spray gun
The ST-3100 is designed to be used for professional high-pressure cleaning (cold/hot water). The spray gun housing is made of impact-
resistant plastic. The valve housing and connectors are made of anti-corrosion metal. The trigger lever is equipped with a safety latch.
Intendet use
The spray gun is designed for dispensing pressurised fluids from high-pressure washers. All safety regulations and rules for high-pressure
washers apply, e.g. DIN EN 60335-79-2 and DIN EN 1829-1. The spray gun must only be used with Group II fluids as per 2014/68/EU. This can
include for instance water and commercially available cleaning or disinfection agents. For further details, please refer to Guideline 67/548/EEC.
Dispensing flammable, explosive, caustic or toxic substances is forbidden!
The spray gun must not be used with abrasive substances.
The spray gun must only be used in a technically perfect condition, unmodified in any way, for the purpose intended, in the awareness of safety
requirements and potential hazards in compliance with these Operating Instructions. Only qualified operators in handling high-pressure washers
may use the spray gun.
To avoid damaging the spray gun install a fine filter with a recommended mesh size of 50 microns into the water inlet to the high-pressure
washer.
Please also comply with the operating instructions for equipment and accessories connected to the spray gun and with the applicable
regulations for cleaning agents.
Symbols and their meanings
Hazard!
If these instructions are not followed there is a danger of physical injury, danger to life and material damage!
Please comply with the Operating Instructions!
Incorrect operation can lead to severe injury. Read the Operating Instructions before using the equipment.
Wear safety gloves!
Wear protective goggles!
Risk of injury due to high pressure!
Do not aim the outlet nozzle at humans or animals. Do not spray any objects containing harmful substances, which
conduct electricity or which are fragile!
For your safety
This Suttner product is state of the art and complies with generally recognised health and safety regulations. Due to the high pressures and
temperatures nonetheless there is the danger of material damage and injury for users and other persons. Please comply with these Operating
Instructions at all times and the relevant regulations for liquid jet washers.
For details regarding personal protective equipment, refer to the German accident prevention regulations "Personal protective equipment"
(VBG101, at present Draft). Personal protective equipment includes for example overalls, head protection, easy-grip protective gloves and non-
slip boots, metatarsal foot protection, respiratory protection, ear protection, eye or face protection.
Do not use the equipment if persons without protective clothing are within range.
www.rm-suttner.com
Advertisement
