Page 1
Operating Instruction Original language: german Product group: Spray gun Product code: 203100831 ST-3100 Vers. September 17 www.rm-suttner.com Technical data Maximum permissible pressure 60.0 bar / 6.00 MPa Minimum pressure 1.0 MPa Maximum flow rate 100.0 l/min Permanent water temperature 90°C Short term water temperature max.
Spray gun The ST-3100 is designed to be used for professional high-pressure cleaning (cold/hot water). The spray gun housing is made of impact- resistant plastic. The valve housing and connectors are made of anti-corrosion metal. The trigger lever is equipped with a safety latch.
Page 3
Risk of injury due to spray medium! Before starting work, check the high-pressure system (spray equipment, hoses, screw connectors, etc.) for signs of leakage and damage. Stop operation immediately if any leakage or malfunctions occur. The spray gun trigger lever must not be blocked in the open position or prevented from closing in any other manner. ...
Manual interference when the high-pressure generator is running can lead to serious accidents! Switch the high-pressure generator off before carrying out assembly work on the high-pressure system. Secure the high-pressure generator against being unintentionally switched on. Turn the water supply off.
Maintenance Assembly, maintenance and repair work may only be carried out by persons trained in maintenance and repair work on wet jet systems and high-pressure systems. Use only spare parts approved by Suttner GmbH. Only use components (hoses, connectors, etc.) approved for the respective pressure and temperature range. ...