Advertisement
IP KNX interface
for Mobotix IP cameras
Technical Specifications and installation instructions
Item number 70199
EN
Elsner Elektronik GmbH Control and Automation Engineering
Sohlengrund 16
75395 Ostelsheim
Germany
Phone+49 (0) 70 33 / 30 945-0 info@elsner-elektronik.de
Fax +49 (0) 70 33 / 30 945-20 www.elsner-elektronik.de
Technical service: +49 (0) 70 33 / 30 945-250
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Elsner IP KNX interface
Summary of Contents for Elsner IP KNX interface
- Page 1 Item number 70199 Elsner Elektronik GmbH Control and Automation Engineering Sohlengrund 16 75395 Ostelsheim Phone+49 (0) 70 33 / 30 945-0 info@elsner-elektronik.de Germany Fax +49 (0) 70 33 / 30 945-20 www.elsner-elektronik.de Technical service: +49 (0) 70 33 / 30 945-250...
- Page 2 Description Description The IP KNX interface serves to transmit data between the Mobotix IP cameras and the KNX bus system. For this purpose, the KNX telegrams are converted into the Ether- net protocols and sent to the LAN in which the cameras are installed (and vice versa).
- Page 3 Elsner Elektronik is not liable for any changes in norms and standards which may occur after publication of these operating instructions.
- Page 4 After the operating voltage has been applied, the device will enter an initialisation pha- se lasting a few seconds. During this phase no information can be received or sent via the bus. IP KNX interface • Version: 13.03.2017 • Technical changes and errors excepted.
Need help?
Do you have a question about the IP KNX interface and is the answer not in the manual?
Questions and answers