Advertisement
Quick Links
PARTS
PART
DESCRIPTION
1
Casters
2
5-Star Base
3
Telescoping Cover
4
Cylinder
5
Seat Plate
Seat and Back
6
Cushions w/ Arms
7
1¼" EZ Knobs
" EZ Knobs
8
9
Hexagonal Wrenches
CUSTOMER SERVICE HOTLINE
800-626-6060
ATTENTION:
Make certain to fully tighten all screws
before using chair.
INSTRUCTIONS
QTY
5
1
1
1
1
1
2
2
2
INSTRUCTIONS
A. Remove all parts from the carton and separate them into part number groups as indicated in the parts list.
B. To begin assembly, place the 5-star base (2) upside down and insert casters (1) into the bottom of base (2).
C.
D. Place the telescoping cover (3) over the the cylinder (4) and rest it on the base (2).
E. Attach seat plate (5) to the bottom of seat and back cushion w/ arms (6) (with the front of seat plate facing
front of seat cushion) by using 1¼" EZ Knobs (7) for the front holes and
holes of seat plate(5)and tighten knobs.
F. Place the pre-assembled seat and back cushions w/ arms(6) and seat plate (5) on top of gas lift (4) and
press down until fully engaged.
G. Standing in front of the chair, lift the back cushion into an upright position. Check to make sure the pins
have locked into the arm holes correctly.
H. Periodically (every 90 days) make sure that the screws are still fully tightened.
WWW.OFFICIENTFURNITURE.COM
S T E L L A R M I D - B A C K C H A I R
A S S E M B LY I N S T R U C T I O N S
.
" EZ Knobs (8) for the rear
Advertisement
