Advertisement
release it. Rather, the lever stays in the position in
which you put it when you are controlling the spindle.
There is no need to hold it in position to keep the
spindle running.
The only maintenance for the Model 1230 is
lubrication and changing of the coolant according to
the schedule, below.
Item
Location
Oiling cup
Top and bottom of arm
at column
Oiling cup
Top of drill head
Oiling cups
Right hand side of
drill head
Arm raising
Rear of column
worm
Sight glass
On drill head
Lift chains
On rear of arm
Ways
On arm
Coolant
In tank
Oil fitting
On quill
Rack
On arm
All of these functions are clearly labeled on the
plate which surrounds the control lever and boot.
Action
Add lubricant with lube gun
Add lubricant with lube gun
Add lubricant with lube gun
Oil using lube gun
Check for level -- fill through
pipe plug hole top of drill head
Lubricate with lube gun
Lubricate with lube gun
Monitor for cleanliness
and efficiency. Replace when
dirty or when cutting becomes
inefficient
Lubricate with gun
Lubricate with gun
Interval
Daily
Mobil Vactra oil AA
Daily
Mobil Vactra oil AA
Daily
Mobil Vactra oil AA
Daily
Mobil Vactra oil AA
Daily
Mobil Vactra oil AA
Weekly
Mobil Vactra oil AA
Twice daily
Mobil Vactra oil AA
When cutting
Daily
Mobil Vactra oil AA
Every 3 days
Mobil Vactra oil AA
Lubricant
Advertisement
