Functional Checkout; Functional Checklist - GE T2100 Service Manual

Functional Checkout

Functional Checklist

Perform each of the functional checkout procedures below and verify that the T2100
Treadmill passes each procedure before operating this treadmill.
Procedure
AC Power Check.
See "AC Line Voltage Test" on
page 39.
Ground Continuity Test.
See "Ground Continuity Test"
on page 43.
Check Power Up - Turn on
T2100 Treadmill
• Is the outlet tight in the
wall?
• Does the plug feel tight
when inserted into the
outlet?
Check Calibration
2021403-120F
Indicate If Failed, perform the following:
Pass/Fail
Contact site electrician to correct.
Contact site electrician to correct.
Verify that the ESTOP is connected.
The T2100 Treadmill will not power
up if the ESTOP is not connected.
Contact site electrician to correct.
Contact site electrician to correct.
T2100 Treadmill
Installation
Indicate
Pass/Fail
49