Page 1
Packing List Thank you for purchasing the BlueTooth Wireless Linear Imaging Scanner. This package should contain the following items. If any are missing or damaged, please call COMPanion at 1-800-347-6439 or 1-801-943-7277. This packing list is used for the indicated product: Wireless Linear Imaging Scanner For Mac &...
Getting Started Congratulations on your selection of COMPanion’s Wireless Linear Imaging Scanner. The Wireless Linear Imaging Scanner is a lightweight barcode reading device that can be used to perform many different tasks depending upon the COMPanion software you are using.
If you have trouble scanning the SET CONNECTION barcode on the cradle, please scan the SET CONNECTION barcode below, followed by the SERIAL number barcode on the cradle. SET CONNECTION IGS010.0—V1140 Bluetooth Wireless Linear Imaging Scanner Page...
The programming barcodes on the following pages are used for different modes that the scanner can operate in. If you have any questions or problems, please contact Technical Support at 1-800-347-4942 or email support@companioncorp.com. IGS010.0—V1140 Bluetooth Wireless Linear Imaging Scanner Page...
You can set the connection by scanning the SET CONNECTION barcode on the bottom of the cradle and then scanning the SERIAL barcode. A SET CONNECTION barcode is provided below. SET CONNECTION IGS010.0—V1140 Bluetooth Wireless Linear Imaging Scanner Page...
This mode is called Memory mode. Use the barcodes below to program your scanner for Memory mode. COMPanion recommends that you do not scan more than a bookshelf or two (approximately 200 barcodes) between downloads. For example, to start using memory mode, scan ENTER SETUP followed by ENABLE MEMORY MODE and then UPDATE.
Page 8
Memory Mode Programming Barcodes ENTER SETUP ENABLE MEMORY MODE <DISABLE MEMORY MODE> SEND DATA CLEAR DATA CLEARANCE CONFIRMATION UPDATE IGS010.0—V1140 Bluetooth Wireless Linear Imaging Scanner Page...
Select ONE of the Mode Settings by scanning the barcode. ALTERNATE MODE TRIGGER MODE (Always On) (On with Trigger) To finish, scan the UPDATE barcode after you have selected a Scan Mode. UPDATE IGS010.0—V1140 Bluetooth Wireless Linear Imaging Scanner Page...
Page 10
1. Scan ENTER SETUP to begin. ENTER SETUP 2. Scan ENABLE ISBN & ISSN CONVERSION ENABLE ISBN CONVERSION <DISABLE ISBN CONVERSION> ENABLE ISSN CONVERSION <DISABLE ISSN CONVERSION> 3. Scan UPDATE to finish. UPDATE IGS010.0—V1140 Bluetooth Wireless Linear Imaging Scanner Page...
You can also disable the buzzer entirely. Do not disable the buzzer if you plan on using Memory Mode. ENTER SETUP HIGH MEDIUM ENABLE BUZZER DISABLE BUZZER UPDATE Please note that the changes in pitch will not affect alert sounds when scanning programming barcodes. IGS010.0—V1140 Bluetooth Wireless Linear Imaging Scanner Page...
Page 12
COMPanion against defects in materials and workmanship for the specified period from the date of shipment by COMPanion to the end-user. During this warranty period, we, or our designated repair facility, will repair or replace (at our option) at no charge any device that proves to be defective, provided you return the device, shipping prepaid, to COMPanion, following the return guidelines below.
Need help?
Do you have a question about the V1140 and is the answer not in the manual?
Questions and answers