Charge The Battery - Zte Optik Get Started

Get Your Device Ready

Charge the Battery

1. Insert the larger end of the connection cord into
the charger jack on the bottom of your device.
2. Insert the USB end of the cord into the AC
adapter.
3. Plug the AC adapter into an electrical outlet
and charge for at least three hours.
Turn the Device On
Press and hold the Power key on the top left
►
side of the device to turn the device on.
• If your device is activated, it will turn on,
• If your device is not yet activated, see
Turn the Device Off
• Press and hold the Power key on the top left
side of the device and then touch OK to turn
the device off.
visit sprint.com/support for complete user guide
search for Sprint service, and begin the setup
application.
"Activate Your Device" on page 2 for more
information.
1