The Connectors; Using The Ac Power Jack; Using Headphones; Using Aux.out Jack - Williams Sonata 88 User Manual

The Connectors

Using the AC power jack

1. Connect the power
cable to the AC power
jack on the underside
of the piano body.
3. Turn the volume switch
anti-clockwise to reach
the minimum volume
level.
5. If you have done the above procedures
you are now safe to turn on the piano.
Caution: When the piano is not in use or during a thunderstorm, disconnect the power for
safety sake.

Using Headphones

An optional set of stereo headphones
can be connected to the headphones
jack located on the left underside of
the piano body. When a pair of
headphones is connected to the jack,
the internal speakers will switch off
automatically.
Caution: Never use the headphone with high volume, as it may damage your sense of hearing.
To prevent the damage of the speakers, ensure that the volume is set to the
minimum level before connecting the power and other device.
Using the AUX.OUT jack
Connect the rear-panel AUX.OUT
jack to amplified speakers, amplifiers
or domestic hi-fi-units for external
amplification.
Note: Connect both left(L) and right(R) channels for the stereo result. If you only connect
either one of the channels, the connected channel will only take effect.
2. Ensure the piano
is turned off when
connecting and
disconnecting the
power.
4. Plug the power cable
into an AC power
outlet.
8
ON
OFF
POWER