Only use mounting parts (fixing anchors and screw) that are suitable for the intended application. Before mounting the K-WALL2L on any K-array speaker, please read carefully the speaker’s User Guide for checking the fixing points and the available configurations.
Page 4
K-WALL2L rev. A 2. PHYSICAL Weight: 0,6 kg (1,3 lb)
K-WALL2L rev. A 3. INTRODUCTION K-WALL2L accessory is a bracket used to hang several K-array speakers on the wall. The two brackets can be mounted with two different configurations, as shown in the pictures below: Configuration 1 Configuration 2 First configuration has an excurtion...
K-WALL2L rev. A 4.1 CONFIGURATION ASSEMBLY 1 You will find the K-WALL2L mounted in the packaging box. Follow the below instructions for assembling the device. 1. Unscrew the two body brackets. 2. Combine the two body brackets.
K-WALL2L rev. A 3. Position the K-array speaker and make sure to turn the clamping screw. 4.2 CONFIGURATION ASSEMBLY 2 1. Unscrew the two body bracketws.
Page 8
K-WALL2L rev. A 2. If there isn’t a regulation needed, rotate 180° the speaker bracket. 3. Position the K-array speaker and make sure to turn the clamping screw. WARNING Before Installation, please read carrefully yuor speaker’s user guide downloadble from our website www.K-array.com...
Page 9
K-WALL2L rev. A 5. WALL GUIDE TEMPLATE Wall Fixing Point Wall Fixing Point...
The contents of this manual are furnished for informational purposes only. K-array s.u.r.l. assumes no responsibility for any errors or inaccuracies that may appear in this manual. K-array s.u.r.l. reserves the right to make modifications without prior notice.