Mounting Instructions Step 1: Pull the locking pin and insert the battery module (#700.0000). Step 2: Switch on the battery and adjust the monitor box to reachable height. 700.4000_Mounting_Instruction_REV01_ENG...
Page 3
Step 3: Loosen the screws on the back of the monitor box. Step 4: Remove the monitor box cover and set it aside. 700.4000_Mounting_Instruction_REV01_ENG...
Page 4
Step 5: Pull the locking pin and remove the battery. Step 6: Hang in the monitor with the pre-assembled adapter rods. 700.4000_Mounting_Instruction_REV01_ENG...
Page 5
Step 7: Tighten both screws in the upper region of the monitor box. Step 8: Tighten both screws in the lower region of the monitor box. 700.4000_Mounting_Instruction_REV01_ENG...
Page 6
Step 9: Connect the DC supply cable (#149.0000) with the Docking Station. Step 10: Pass the DC supply cable through the cable bushing. 700.4000_Mounting_Instruction_REV01_ENG...
Page 7
Step 11: Plug the DC supply cable into the monitor. Step 12: Connect the HDMI cable to the media equipment and monitor. 700.4000_Mounting_Instruction_REV01_ENG...
Page 8
Step 13: Fix the cable with cable ties. Step 14: Sort the cables and cut off cable tie. 700.4000_Mounting_Instruction_REV01_ENG...
Page 9
Step 15: Close the monitor box cover. Step 16: Tighten the screws on the backside of the monitor box. 700.4000_Mounting_Instruction_REV01_ENG...
Need help?
Do you have a question about the SWEDX SDS58K8-01-DC and is the answer not in the manual?
Questions and answers