Advertisement
WIRING THE SYSTEM
IMPORTANT: Make sure all equipment is turned off before making any
connections.
For speaker connections, use a high-quality speaker wire with polarity coding.
The side of the wire with a ridge or other coding is usually considered positive
polarity (i.e., +). Heavier-gauge wire should be used when more than 50 feet
(15m) of speaker wire is required. The wire channels on the rear of the DP-1
will accommodate most types of 14- to 18-gauge wire.
NOTE: If desired, consult your local dealer about speaker wire and connection
options.
To ensure proper polarity, connect each + terminal on the back of the amplifier
or receiver to the respective + (red) terminal on each speaker, as shown in
Figure 8.
Connect the – (black) terminals in a similar way. See the owner's guides that
were included with your amplifier or receiver to confirm connection procedures.
3-5
Advertisement
