Download Print this page

Ikelite DLM Dome Port with Zoom Extension .375 Installation And Use page 2

Advertisement

3. Clean and lightly lubricate the Port Base O-ring, Diagram
B. When removing an o-ring, use a smooth nonmetallic
object such as a guitar pick or toothpick to avoid
scratching the o-ring sealing area. Apply an even coating
of lubricant on the o-ring, just enough to make it slightly
shiny. Avoid dry spots or excessive buildup of lubricant
which can attract debris. When using a Port with optional
Port extension, line up the Thumbscrews and firmly press
components together until they are flush around the
circumference; tighten each Thumbscrew until it stops.
DO NOT overtighten.
4. Attach the Port or Port with extension directly to your
housing as shown in Diagrams B and C.
5. Tighten each Thumbscrew until it stops. All Thumbscrews
should be flush against the port body surface when
properly tightened. DO NOT overtighten.
Attaching Shade to a DLM Dome Port
1. Port shade has 3 small set screws. If necessary, loosen
screws and rotate shade so the Shade Extensions are in
the 6 and 12 o'clock position.
2. Tighten screws so they are snug. DO NOT overtighten.
Travel and Storage
1. Remove the Port from the Housing Port Base or Port
Extension for long-term storage.
2. Lightly lubricate the Port Base and Extension o-ring(s)
prior to storage. O-rings may be left in place, or removed
and placed in a resealable plastic bag.
3. Store in a cool, dry place.
Limited Warranty
This Ikelite product is warranted against any manufacturing
defects for a period of one (1) year from the original date
of purchase. To obtain warranty service, the product must
be returned to Ikelite postage paid. Ikelite will, at its sole
discretion, repair or replace such products, and will return
to customer postage paid. All other claims of any nature are
not covered. Except as mentioned above, no other warranty
expressed or implied applies to this Ikelite product.
Diagram C
Correctly Installed Port
Properly aligned Shade Extensions
© 2017 Ikelite Underwater Systems
5516.05.16.17_DLM_Port_Zoom_ShadeExtension_1_9-17
Thumbscrew flush
against port body

Advertisement

loading

This manual is also suitable for:

Dlm dome port with zoom extension 1.00Dlm 6” dome shade5516.165516.175516.05