Power Source; Protect Your Furniture - SONIQ Qmedia QMS300B Instruction Manual

POWER SOURCE

This system is designed to operate on 240V AC
50Hz house current only.
Connecting this system to any other power source
may cause damage to the system and such damage
is not covered by your warranty.
NOTE: The system has an AC plug and will only fit into matching AC outlets. This
is a safety feature to reduce the possibility of electric shock. If the plug will not fit in
your AC outlets, you should have the outlet changed by a qualified, licensed
electrician. Do not use an adapter to make the plug fit into your outlet. This
defeats the safety feature and could expose you to electric shock.

PROTECT YOUR FURNITURE

This model is equipped with non-skid rubber 'feet' to prevent the product from
moving when you operate the controls. These 'feet' are made from non-migrating
rubber material specially formulated to avoid leaving any marks or stains on your
furniture. However certain types of oil based furniture polishes, wood
preservatives, or cleaning sprays may cause the rubber 'feet' to soften, and leave
marks or a rubber residue on the furniture. To prevent any damage to your
furniture we strongly recommend that you purchase small self-adhesive felt pads,
available at hardware stores and home improvement centers everywhere, and
apply these pads to the bottom of the rubber 'feet' before you place the product on
fine wooden furniture.
- 3 -