Care Of The Cabinet - SONIQ Qmedia QMS300B Instruction Manual

panel of the unit. The auxiliary function will only activate when the aux in jack
is fitted with connection cable
Note: The connection cables are not included.
1. Press and hold the PLAY/PAUSE button on the main unit or FUNCTION
button on the remote control to inter-change the play mode from iPod to Aux.
Press PLAY/PAUSE button once on the main unit or remote control to
inter-change the play mode from Aux to iPod. During AUX playback, the
iPod display will not light up.
2. Turn your auxiliary source 'On' and operate it as usual. The sound from the
auxiliary source will be heard through the speakers of this system.
3. Adjust the VOLUME level controls of this system as desired.
RESETTING
If the system does not have any respond, you may have experienced a severe
electric shock (ESD) or a power surge that triggered the internal computer to shut
down automatically. If this occurs, simply disconnect the main power and connect
the main power again after one minute.
Note: Although disconnect the power will unlock the internal computer after a
power surge, it will also erase all of the settings. After turning 'On' the unit, you will
need to reset the settings again.

CARE OF THE CABINET

If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax,
polish sprays, or abrasive cleaners on the cabinet.
CAUTION
Never allow any water or other liquids to get inside the unit while cleaning.
AC Power:
Remote Handset
Unit Output Power:
Power Consumption:
AC 240V ~50Hz
DV 3V size: CR2025 X 1
2 X 15 Watts RMS (Main Speaker)
1 X 40 Watts RMS (Subwoofer)
96 W
- 10 -