Rom Cartridge - Yamaha DX7 II FD Supplemental Booklet

ROM Cartridge

Accessing Banks
As mentioned earlier, a RO M cartridge may contain up to four bank s of data. These may
include Voice and Performance data, Fractional Scaling data, or Micro Tuning data.
Follow the steps below to access and select a specif i c bank in a DX7 II RO M cartridge.
Insert the factory ROM cartridge into the cartridge slot. Then ...
To hear the factory RO M voices
data into the DX's Internal Memory. Then select Bank 2 for Voice and Performance, Bank
3 for Fractional Scaling, and Bank
Your DX7 II was shipped from the factory with Bank
Internal Memory. To use the other set of 64 voices and 32 performances on the cartridge,
select Bank 2 Voice and Performance (see above). Now, when you press CAR1RIDGE
you will have access to a complete! y different set of voices and performances. These two
sets of data must be used in this conf i g uration. In other words, the Bank 2 cartridge
performance memories expect to "see" Bank
as
they are intended, load Bank
4
for Micro Tuning data.
1
voices in the Internal Memory.
-26 -
.
1
Voice and Performance
1
Voice and Performance data in