Turning The Screen On And Off - Huawei TalkBand B6 Online Help Manual

HUAWEI TalkBand B6 Online Help
HUAWEI TalkBand B6 Online Help
2.
3.
Method 2: Set a smart or event alarm using the Huawei Health app.
Setting a smart alarm:
1.
2.
3.
4.
5.
Set an event alarm:
1.
2.
3.
4.
5.

2.6 Turning the screen on and off

Using Raise to wake: Open the Huawei Health app, go to the device settings
screen, enable or disable Raise to wake.
Adjusting the screen brightness level: On your band, go to Settings > Display >
Brightness, and set your preferred screen brightness level.
Issue 01 (2020-07-31)
Set the alarm time and repeat cycle then touch OK. If you do not set the
repeat cycle, the alarm is a one-time alarm by default.
Touch set alarm to modify the alarm time, repeat cycle, or delete the alarm.
You can only delete event alarms.
Open the Huawei Health app, enter the device settings screen, go to Alarm >
SMART ALARM.
Set the alarm time, smart wakeup time, and repeat cycle.
Touch √ in the top-right corner (Android devices) or Save (iOS devices).
Swipe down on the Huawei Health app's home screen to ensure the alarm is
synced to the band.
Touch an alarm you have set to modify the alarm time, smart wakeup time,
and repeat cycle.
Open the Huawei Health app, enter the device settings screen, go to Alarm >
EVENT ALARMS.
Touch Add to set the alarm time, smart wakeup time, and repeat cycle.
Touch √ in the top-right corner (Android devices) or Save (iOS devices).
Swipe down on the Huawei Health app's home screen to ensure the alarm is
synced to the band.
Touch set alarm to modify the alarm time, repeat cycle, or delete the alarm.
NO TE
● Event alarms are synced between the band and the Huawei Health app.
● There is only one smart alarm by default. You cannot add more or delete the smart
alarm. You can set a maximum of five event alarms.
● The smart alarm may vibrate in advance if it detects that you woke up before the alarm
is set to go off using HUAWEI TruSleep
smart alarm will vibrate in advance if it detects that you are no longer in deep sleep or
already awake.
● When the alarm vibrates, touch
band to snooze (for 10 minutes). Touch
stop on its own after being snoozed three times and no other operation has been
performed for one minute.
● Currently, only alarms set on phones that run EMUI 8.1/Magic UI 2.0 or later can be
synced to the band.
Copyright © Huawei Technologies Co., Ltd.
2 Application management
TM
. If HUAWEI TruSleep
, swipe right or press the side button of the
to stop the alarm. The alarm will
TM
isn't enabled, the
16