Advertisement
ASSEMBLY & USE
Infuser Carafe:
Image for reference only: actual product may vary
1. Remove lid (A) by holding the container (B) and pulling up on lid (A).
2. Disassemble lid to clean:
a. Press the silicone knob on the underside of the strainer (A1) to
slightly lift lid cover (A2).
b. Grip lid cover (A2) and pull up until it separates from the strainer
(A1).
c. Hold the lid lip (A3) firmly and pull down on the strainer (A1) until
the lid lip (A3) and strainer (A1) separate.
3. Wash all parts separately, then re-assemble by following instructions
above in reverse order.
a. Ensure strainer (A1) is properly seated to minimize leaking.
4. Fill container with desired beverage and infusing ingredients (fruit,
vegetables, ice, etc). Do not overfill: Leave space for lid (A) and infusing
ingredients to avoid overflow.
5. Replace the lid (A) by gently pressing the lid (A) into container (B).
6. To serve, tilt product and pour contents through the lid (A).
7. When finished pouring, bring product to an upright position and store.
LIMITED WARRANTY
Thermos L.L.C. warrants this Genuine Thermos Brand product to be free from defects in
material or workmanship for one year from date of purchase. This warranty does not cover
ordinary wear and tear or color fading, or any condition affected by abuse, neglect,
alteration, accident or improper use or maintenance.
We will, at our option, repair or replace any product component part that fails to conform to
this warranty within 30 days after its receipt by our factory service department. IN NO
EVENT WILL THERMOS BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL
DAMAGES.
Advertisement
