Prime Source Speroni Pumps Grip-Rite GR 2000 Owner's Manual page 16

PNEUMATIC NAILING & STAPLING TOOL/COMPRESSOR WARRANTY
Pneumatic nailers, staplers & compressors marketed under the GRIP RITE
be free from defects in workmanship & materials (except rubber o-rings, seals, driver blades, dipsticks,
switch boxes, gauges, drain cocks, non-return valves, regulators & air filters) for a period of one year
from the date of original purchase.
This warranty will not apply when:
• The original receipt (or copy of the original receipt), showing the original purchase date, is not provided
with tools/compressors sent in for warranty repair.
• The tool/compressor has been misused, abused or improperly maintained.
• Alterations have been made to the original tool/compressor.
• Repairs have been attempted/made to the original tool/compressor by any entity other than a proprietary
PRIMESOURCE® service/warranty center or authorized service/warranty center.
• Non- GRIP-RITE TOOLS
• The tool has suffered any physical damage due to the use of non-PRIMESOURCE
• Repairs are required due to normal wear & tear.
• The tool/compressor has been inadequately packaged leading to damage in-transit to the service/warranty
center.
*Approved fasteners include the following brands GRIP-RITE FAS'NERS
In no event shall PRIMESOURCE
the sale or use of these products. This disclaimer applies both during & after the term of warranty.
THIS IS OUR WARRANTY & IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
MPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILTY AND FITNESS FOR A PARTICULAR
PURPOSE (EXCEPT AS MAY BE OTHERWISE PROVIDED BY LAW).
Should any mechanical problems develop during (or after) the one year warranty period, please call
(800) 676-7777. Your call will be routed to the nearest PRIMESOURCE
ask for details of the nearest authorized service/warranty center. You can also find an authorized warranty
center nearest you by logging on to our website at www.primesourcebp.com.
Please : adequately package the products to avoid damage in-transit (in the case of pneumatic tools,
the original blow mold plastic carrying case is considered adequate packaging), and provide the original
receipt (or copy of the original receipt showing the original purchase date). We ask that when returning
your product in accordance with the terms of the applicable warranty, you please complete the enclosed
Warranty Return card. This will assist us in making repairs covered by the warranty and is not for product
registration. The foregoing shall not affect the terms of the express warranty or the consumer's warranty
enforcement rights then in effect.
Also, please insure your shipment with the shipping company of your choice. PRIMESOURCE
be responsible for any tools &/or compressors that are lost by the shipper on route to the PRIMESOURCE
service/warranty center.
This limited warranty gives you specific legal rights, and you may also have other rights, which vary,
from state to state.
P S
RIME
BUILDING PRODUCTS, INC.
An Itoku Company
TM
parts have been used.
® be liable for any indirect, accidental or consequential damage from
P S
RIME
BUILDING PRODUCTS, INC.
An Itoku Company
Parts ordering and technical help line:
(800) 207-9259
To fax in part orders:
(800) 207-9614
www.primesourcebp.com
OURCE
®
TM
,FAS'NERS UNLIMITED
® distribution center & you should
OURCE ®
TM brand are warranted to
® approved fasteners*.
TM
® will not
®