Mooer Micro Series Owner's Manual

Digital Delay Pedal
Main Features
Ÿ 3 Working Modes: Mod/Normal/Kill Dry
Ÿ Kill Dry function for using in the parallel FX loop
Ÿ Full metal shell
Ÿ Very small and exquisite
Ÿ True bypass
Ÿ DC 9V Adapter power supply
Mod: Add chorus to the delay sound, nice spacy feeling.
Normal: Basic clean delay effects, natural and clear.
Kill Dry: Cut the dry signal, only output the wet signal, very useful
when in a parallel FX loop.
3
6
7 8
9
2
5
7. LEVEL Knob: Adjust the level of delay effects.
8. F.BACK Knob: Adjust the feedback of delay effects.
9. D.TIME Knob: Adjust the delay time.
Delay Time: 25ms~1000ms
Input: 1/4" monaural jack (impedance: 470k
Output: 1/4" monaural jack (impedance: 100 Ohms)
Power Requirements: AC adapter 9V DC (center minus plug)
Current Draw: 128 mA
Dimensions: 93.5mm (D) × 42mm (W) × 52mm (H)
Weight:160g
Accessories: Owner's Manual
*
Disclaimer: Any specification's update won't be amended in this manual.
1. TRUE BYPASS Footswitch:
Push down the footswitch
to switch between effects
and bypass status.
2. ON/OFF LED:
Instructs effects or bypass
status of REPEATER, when
the LED is lit up, the effects is on.
4
3. DC IN Power Jack:
For power supply, use a 9-volt
DC regulated AC adapter(plug
polarity is positive on the barrel
and negative in the center).
4. INPUT Jack:
1/4" mono audio jack, for
connecting guitar.
5. OUTPUT Jack:
1/4" mono audio jack, outputs
the signal.
6. Mode Switch:
Switch between Mod mode, Normal
mode, and Kill Dry mode.
Ohms )