Distortion Pedal
Main Features
A high gain distortion sound with powerful mid frequency
Full metal shell
Very small and exquisite
True bypass
DC 9V Adapter power supply
3
6
7
TONE
8
4
GAIN
5
6. VOLUME Knob:
Adjust the volume of the distortion sound.
7. TONE Knob:
Adjust the tone color of the distortion sound.
8. GAIN Knob:
Adjust the gain of the distortion sound.
Input: 1/4" monaural jack (impedance: 1M
Output: 1/4" monaural jack (impedance: 1k Ohms)
Power Requirements: AC adapter 9V DC (center minus plug)
Current Draw: 7 mA
Dimensions: 93.5mm (D) × 42mm (W) × 52mm (H)
Weight: 160g
Accessories: Owner's Manual
*
Disclaimer: Any specification's update won't be amended in this manual.
1. TRUE BYPASS
Footswitch:
Push down the footswitch
to switch between effects
and bypass status.
2. ON/OFF LED:
Instructs effects or bypass
status of CRUNCHER, when
the LED is lit up, the effects is
on.
3. DC IN Power Jack:
For power supply, use a 9-volt
DC regulated AC adapter(plug
polarity is positive on the barrel
and negative in the center).
4. INPUT Jack:
1/4" mono audio jack, for
connecting guitar.
5. OUTPUT Jack:
1/4" mono audio jack, outputs
the signal.
Ohms
)