Advertisement
5.3.
Insert fix tube (#8) to the hole of left side fixation plate B using flat washer Ø12 (#7) and cotter pin Ø3x30 (#12). Then attach left side
fixation plate B to the movable seat (#19) using hex bolt M5x12 (#85) and protruding gasket (#86), fig.4. Secure with pin (#15), fig.5.
fig.4
5.4.
Attach handle wheel C to platform (#31) using hex bolt M8 x 20 (#40) and nylon lock nut M8 (#84), fig.5.
fig.6
5.5.
Remove eyebolt (#60) from base and attach the eyebolt to the edge of the platform,( to be used as a tie down location point) fixed with
large washer Ø10 (#64) and hex lock nut M10 (#58). Then attach sloping plate to the platform, fig.6.
5.6.
fit Side eXteNSioNS (Not Supplied) model No. mc680eXk
fig.7
5.6.1.
Insert left & right side extension plate into the holes of platform using four sets hex bolt M10x20 (#18) and hex lock nut M10 (#58).
Attach two side ramps to the platform, fix left side with hex bolt M10x20 (#18) and nylon lock nut M10 (#58), then fix right side with hex
bolt M10x35 (#29) and nylon lock nut M10 (#58).
© Jack Sealey limited
fig.5
SpecificatioN: Weight: 68kg, Width: 510mm
Original Language Version
mC680E Issue:1 - 21/09/18
Advertisement
