Digizoid ZOFS Quick Start Manual

1
Charge
Low Battery - Orange
Empty Battery - Red
Charging - Orange
Charged - Blue
Tips & Tricks
• To mute, select SVT, then rotate switch downwards. To unmute, rotate the switch upwards.
• To scan volume levels in steps of 5, hold the switch rotated upwards/downwards.
• ZO's screen dims when controls aren't used for 30 secs. Brighten without changing settings by pushing in the switch.
• When the battery is about to die, the audio will mute, but the screen will stay lit for a few minutes.
• If ZO is on while charging, the plug icon may be orange even though the battery is fully charged. To verify charge level,
unplug the charging cable. If the icon becomes a blue battery, it is fully charged.
ZO Quick Start Guide
FS
2
Plug In
out in
0 16
volume bass
16
svt treble
ZO
FS

Always startup in this order:

1. Turn ZO on
2. Set ZO's volume to 0
3. Connect player to ZO
EQ
4. Set player volume to 75%
5. Turn on player
6. Put on headphones
7. Increase ZO's volume
3
Adjust
Push in & release switch
to turn ZO on & toggle through
settings.
Rotate switch up/down
to increase/decrease levels.
Push & hold switch
to turn ZO off.