Limitations Of Sps Under Vmware - One Identity Safeguard for Privileged Sessions T1 Installation Manual

Hide thumbs Also See for Safeguard for Privileged Sessions T1:

Installation manual (37 pages)

Table Of Contents

Table of Contents

CAUTION:

Hazard of data loss When you install or reinstall SPS in a virtual

environment, always create new hard disks. Using existing hard

disks can cause unexpected behavior and operational problems.

Configure a fixed size disk with at least 20 GiB space. About 10 GiB is

required for the base system, the remaining disk space is used to store

data. To increase the initial disk size, see Modifying the disk size of a SPS

virtual appliance.

NOTE:

SPS will use the network card with the lowest PCI ID as eth0 (Physical

interface 1), the card with the second lowest PCI ID as eth1 (the Physical

interface 2), and so on. In some cases, this might differ from the labels in

the VMWare management interface, for example, it is possible that eth0 will

be labeled as Network adapter 4, and as a result, the SPS Welcome Wizard

will not be available on Network adapter 1.

SPS requires at least one network card (preferably VMXNET3) to function.

Configurations can use up to 6 network cards.

NOTE:

The fourth (eth3) network card is reserved for High Availability mode by

default. Therefore, make sure you enable, but do not attach, the fourth

(eth3) network card to a network.

2. After creating the virtual machine, edit the settings of the machine. Set the

following options:

Under Options > VMware Tools enable the Shutdown, Suspend,

options, otherwise the SPS administrator will not be able to access these

functions from the SPS web interface.

Under Options > Boot options enable the Force BIOS

required to be able to check the system time (and modify it if needed) before

installing SPS.

3. Login to your support portal and download the latest One Identity Safeguard for

Privileged Sessions installation ISO file. Note that you need to have purchased SPS

as a virtual appliance or have partner access to download One Identity Safeguard for

Privileged Sessions ISO files. If you are a partner but do not see the ISO files, you

can request partner access within support portal.

4. Mount the ISO image and boot the virtual machine. Follow the on-screen instructions

to install SPS.