Download Print this page

Care Instructions; Fitting & Replacing Batteries - TTS See and Speak User Manual

Recordable magnifier

Advertisement

Care Instructions

All cleaning should be carried out by an adult.
n
Ensure the product is switched off before cleaning begins.
n
To clean the See and Speak case wipe gently with a clean, damp cloth.
n
To clean the lens use warm soapy water, wipe away any excess suds and
n
dry thoroughly.
Do not allow the product to come into contact with any liquids during use.
n
Fitting and Replacing Batteries
Your See and Speak uses 2 x AAA batteries.
n
Batteries must be inserted correctly as shown below.
n
Remove the battery cover with a crosshead screwdriver.
n
Fit batteries as shown.
n
Replace the battery cover, and tighten screw.
n
1
Battery Warnings
Batteries should be fitted by an adult.
n
Use only batteries of the same type.
n
Do not mix new and old batteries, replace all batteries at the same time.
n
Do not mix rechargeable and non-rechargeable batteries.
n
Ensure all used batteries are disposed of in the correct manner.
n
See and Speak
2

Advertisement

loading

This manual is also suitable for:

Sc00596Sc00553